Industrial electric winch

TVI-TEC-TIRLIFT

TVI – TEC – TIRLIFT 2 – MR

Industrial electric winch for loads of 1,000 to 10,000 kg

The range of compact electric winches TVI designed for the industrial market. Due to the robustness, the compact dimensions, the wide range of load capacity, the large availability of options, the diversity of possible attachment, the TVI is perfectly adapted to all standard lifting or pulling/hauling applications.

TVI

Technical Characteristics

  • Power supply 230 / 400 V / 3 Ph / 50Hz.
  • IP55 motor brake unit.
  • Low voltage control 24V – Thermal circuit breaker.
  • Electric cubicle IP 55 on the winch.
  • Drum length : 350 mm.
  • Planetary gear box.
  • Push button box with emergency stop.
  • 3 meter control cable.
  • Several rope exit and options available.

EXTRA

  • IP66 limit switches.
  • Additional rope fixation.
  • Load limiter.
  • Grooved drum 1 fixation.
  • Grooved drum 2 fixations.
  • Brake release.
  • Add shaft.
  • Drum length modification.
  • Drum cover at 3/4 surface.
  • Total Drum cover protection.
  • Special motor voltage.
  • Motor tropicalized.
  • IP 56 motor.
  • IP 65 motor.
  • H class motor.
  • Slack rope detection.
  • Pressure roller.
  • Variable speed.
  • Offshore paint.
  • Radio remote.

TEC

The ideal solution for traction and hoisting loads of up to 7,5 tons. This line of electric winches will perfectly match your needs.
Furthermore, its design displays qualities of discretion, since it is highly compact, and calls for very little maintenance. TEC electric winches comply with the EC directive concerning machines.

Technical Characteristics

  • A frame of modular and open-ended design, permitting for instance multiple cable exit directions from the drum
  • 230 / 400 V / 3 Ph / 50Hz power supply
  • Control voltage 24 V switchgear. Thermic control circuit breaker
  • Electric cabinet to IP 55
  • Handset with emergency stop on 3m sprially wound cable

Extra

  • Limit switch
  • Electronic load limiter
  • Grooved drum
  • Variable speed winch
  • Radio remote control

TIRLIFT 2

This line of all-purpose electric winches for lifting and traction adapt perfectly to all your needs (wide load range, speed, numerous options).
They are designed for the lifting of loads of 125 kg to 1,500 kg. Compliance with the EC directive concerning machines.

Technical Characteristics

These winches comply with directive CE 2006/42/CE are designed for pulling and lifting of loads between 125 kg and 1,500 kg (Class FEM 1Am, 2m).
TIRLIFT type TL and TC electric winches offer the following standard features :

  • Protection of electrical components (control panel and motor), type IP55.
  • Totally enclosed, life lubrificated, helicoidal gear treated (type according load range).
  • One or two lifting speed or variable speed.
  • A start/stop contactor (for type B and C equipment).
  • A 48 V Low Voltage transformer (for type B and C equipment).
  • A wide line of hoisting motor with insulation class F, IP 55 protection.
  • Spring loaded disc brake.
  • A modular and evolutional under-frame allowing many directions for wire rope outlets from the drum.

Extra

  • Tropicalized motor.
  • Thermal protection.
  • Others voltage (delay from 3 to 6 weeks).
  • Additional length of cable for the buttons box or the remote cubicle per meter.
  • Lifting limit switch.
  • 4 step gear limit switch (IP66).
  • Drum rope pressure roller.
  • Manual brake release.
  • Left or right groved drum (1 anchor).
  • Left or right groved drum (2 anchors).
  • Left and right groved drum (2 anchors).
  • Left or right groved drum (1 anchor) for tube higher diameter.
  • Left or right groved drum (2 anchors) for tube higher diameter.
  • Left and right groved drum (2 anchors) for tube higher diameter.
  • Add anchor rope.
  • Center separation plate.
  • Motor cover (available only with A and C type).
  • Load limiter (1 speed).
  • Radio control = emitter + receiver (Hauling).
  • Add emitter (Hauling).
  • Radio control = emitter + receiver (Lifting).
  • Add emitter (Lifting).
  • Tubular protection Frame.
  • Counter weight 10 kg for cable Ø 4/5/6.
  • Counter weight 20 kg for cable Ø 7/8.
  • Counter weight 25 kg for cable Ø 9/10.
  • Counter weight 50 kg for cable Ø 11,5/13.

MR

TSingle-phase electric winch designed for lifting and traction simple, ideal to replace a manual winch, used in cases of occasional maintenance.

Technical Characteristics

  • Power supply 230 / 1 Ph / 50Hz.
  • Electric cubicle.
  • Direct control.
  • Limit switches as standard (2 steps).
  • IP 44 MR1 – IP 54 MR2 & 3.
  • Push button box with emergency stop.
  • 3 meter control cable.