We design, construct and install steel buildings for a wide range of activities non dependent on their size such as:

  • Industrial and commercial use
  • Multi-storey buildings
  • Composite structures
  • Logistic centers
  • Office buildings
  • Exhibition centres
  • Hangars
  • Car park areas
  • Sports facilities.





Most often used basic building types according to the spans which are used are:

  1. a) single span,
  2. b) multiple span,
  3. c) multiple span with supporting columns,
  4. d) with or without mezzanines as well as multi storey buildings.

We can also manufacture castellated or variable section beams.


Building width: assigned as the distance from outside sheeting of one sidewall to outside sheeting of the opposite sidewall or the width of the structural frame.

Building length: assigned as the distance from outside flanges side of endwall columns till the outside flanges side of the endwall columns. Building length is divided by interior bay lengths.

Interior bay length: it is the distance between the axis of an interior column till the axis of next interior column.

Column height: assigned as the distance from the anchorage base of the main column till the highest point. In cases that columns are recessed or elevated from finished floor, then measurement begins from finished floor level.

Roof slope: assigned as the angle of the roof constituted by rafters with respect to horizontal axis.



Wall – Roof Claddings: Consists of insulated composite panels from polyurethane or Rockwool or appropriate sheet metal.

Apertures/Openings: the most common types of doors are of industrial type: roll-ups, personnel, sliding, dock shelters, etc. Window types are of aluminium unlatch or

sliding with single or double glass.

Fascias: the main purpose is to hide the roof slope for a better building appearance.

Trims: they offer finishing and waterproofing at building edges. Manufactured by uniform pieces of maximum length 10m from galvanized or color sheet metals.

Gutter: manufactured by uniform pieces of maximum length 10m from galvanized, aluminium, inox or color sheet metals.

Roof Skylights: consists of fiberglass they offer natural floodlight at working area. They come down by percentage of the total covered roof area.

Purlin - Girt: consists of hot rolled sections or thin wall cold formed (Z-C-Σ) galvanized steel sections.

Wind bracing: consists from hollow or angle section beams providing stability against wind or earthquake forces.

Canopies: consists from hot rolled sections covered either from panel, sheet metal, polycarbonate sheets or glass.

Mezzanine: the main purpose is to utilize the height of the area. It consists by a combination of hot rolled sections profiles and profiled steel sheeting with a galvanized trapezoidal profile ready to accept at the upper surface concrete.

Steel Building